admin-inel

DESCRIPTION
The device is a remote module via RS485 with Modbus RTU protocol consisting of two outputs and potential free contact input with an internal circuit water detector (sensor flood).
The module, properly directed, can control the water supply shut off and monitor a leak is detected. You can also set the order of operation of an internal relay, this relay can be used in home automation to control air conditioning, furnace, etc…
The power module is to be used independently and a power supply capable of supplying at least 12v/500 mA

DESCRIPTION
The device is a timer module that is activated by an external pushbutton (pneumatic, piezoelectric or isolated) and maintains the closed contact of an internal relay, the time set in the front potentiometer.
The module can be programmed as a switch, function set/reset by adjusting the potentiometer front below 1/4 of its total travel. Thus a pulse activates the relay, the next turns it off and so on.
This circuit is intended to drive a water pump, a lamp, etc… by an external button.

DESCRIPCION
El dispositivo es un modulo temporizador que se activa mediante un pulsador exterior (neumático, piezoelectrico o libre de potencial) y mantiene el
contacto cerrado de un rele interno, el tiempo ajustado en el potenciometro frontal.
El circuito puede programarse como un interruptor, función set/reset, ajustando el potenciometro frontal por debajo de 1/4 de su
recorrido total. De esta forma una pulsación activa el rele, la siguiente lo desactiva y así sucesivamente.

DESCRIPTION
Servicions y Aplicaciones INEL has a large variety of products related to the DMX protocol, specifically, the device is a receiver and driver for LEDs incorporating the protocol and has 3 DMX channels can be selected using a dip-switch on the inside of the device.
It is specifically designed to handle systems with RGB color changing LED strips High Luminosity.

DESCRIPCION
Servicions y Aplicaciones INEL dispone de una gran variedad de productos relacionados con el protocolo DMX, en concreto, el dispositivo es un receptor y driver para leds que incorpora el protocolo DMX y dispone de 3 canales que pueden ser seleccionados mediante un dip-switch en la parte interior del dispositivo.
Está específicamente diseñado para el manejo de sistemas de cambio de color RGB con tiras de LED de Alta Luminosidad.

DESCRIPTION
Servicions y Aplicaciones INEL has several DMX modules for control of lighting, in particular, this device lets you control the brightness control in electronic ballasts with input 1 – 10v with a bus connection to DMX.
The module features three independent channels of control, in addition, each channel includes a relay contact that can be used to disconnect the power supply 220v ballasts.

DESCRIPCION
Servicions y Aplicaciones INEL dispone de diversos modulos DMX para el control de iluminacion, en concreto, este Dispositivo permite controlar la regulación de luminosidad en balastros electrónicos con entrada 1 – 10v mediante conexión a un bus DMX.
El modulo dispone de tres canales independientes de regulación, ademas, cada canal incorpora un contacto de relé, que puede utilizarse para desconectar la alimentación de 220v de los balastros.

DESCRIPTION
Servicions y Aplicaciones INEL has a large variety of products related to the DMX protocol, in particular, this device is a DMX receiver with four relay outputs contact, which are controlled via four DMX channels.The module has a dip-switch on the inside of the device to select the 4 channels that respond.
This unit is specifically designed to accommodate 4 potential free contacts, three of them with the same common and the room completely free.

DESCRIPCION
Servicions y Aplicaciones INEL dispone de una gran variedad de productos relacionados con el protocolo DMX, en concreto, este dispositivo es un receptor DMX con cuatro salidas por contacto de rele, que se controlan mediante cuatro canales DMX.El modulo dispone de un dip-switch en la parte interior del dispositivo para seleccionar los 4 canales a los que responderá.
Esta unidad está específicamente diseñada para facilitar 4 contactos libres de potencia, tres de ellos con un mismo común y el cuarto totalmente libre.

DESCRIPTION
Servicions y Aplicaciones INEL has a large variety of products related to the DMX protocol, in particular, this device is a controller for incandescent lamps or resistive loads up to 300W. which is controlled by DMX512 protocol.
This circuit has a channel that can be selected via a dip switch on the inside of the device.
Through the DMX protocol is possible to expand the number of devices to a single channel or more, to give control to your project.